-
Are all Post-it notes basically the same?
-
Can I print custom Post-it notes with a template?
-
What should I look for in a Post-it easel pad?
-
How do I pick A4 paper without overpaying?
-
What's the fastest reliable way to scan documents on the printer?
-
Should we pay rush fees when we need supplies before a deadline?
-
What do I do with requests that aren't office supplies at all—like a "grow a garden calculator"?
I'm the office administrator for a 400-person company. I manage all office supply ordering—roughly $180,000 annually across 11 vendors. I report to both operations and finance. When I took over purchasing in 2020, I inherited a system that was equal parts spreadsheet and guesswork.
Below are the questions I actually get from new hires, department coordinators, and occasionally my own boss. I've answered them so many times that I finally wrote them down.
Are all Post-it notes basically the same?
Within the Post-it line, no. Standard notes, Super Sticky, and Full Adhesive notes use different adhesive formulations, and they behave differently on vertical surfaces. Standard notes are fine for horizontal desk work. They will eventually curl off a monitor or a whiteboard. Super Sticky holds longer on walls. Full Adhesive notes lie flat and don't curl at the edges.
Across brands, specifications vary even more. What most people don't realize is that "sticky note" isn't a standardized product category. Adhesive strength, paper weight, and repositionability all differ. A lower-cost alternative might work fine for a grocery list on a desk. It may not hold a status update on a glass wall for a week.
We standardized on Post-it because our staff expects consistency, and the price difference across a year is small relative to the complaints when notes fall off during a client meeting. We've done maybe 70 supply orders this year. Maybe 65, I'd have to check. The sticky note line items have been steady since 2022, when we stopped experimenting with alternatives that didn't meet our wall-use needs.
Can I print custom Post-it notes with a template?
Yes. Search for a Post-it note printer template on the brand's site, download the PDF, and follow the alignment guide. You can run a sheet of 3x3 notes through a laser printer. I did this for a project kickoff in 2024. Two hundred notes with team assignments, printed in about 25 minutes.
Here's the thing: alignment is finicky. Budget the first two or three sheets as waste while you adjust margins. Laser only—inkjet ink stays wet too long and the heat from some printers doesn't agree with the adhesive. If your office printer runs hot, test one sheet first.
Is it worth it? For a one-time event where you need 100-300 notes by tomorrow, yes. For recurring use, order them printed. The template route is a hack, not a workflow. The labor cost only makes sense when the volume is low and the deadline is close.
What should I look for in a Post-it easel pad?
Three specs: bleed-through, adhesion, and perforation. Bleed-through matters most. If your team uses permanent markers—and they will—a lighter-weight sheet lets the ink soak through and ruin the next page. You lose half a pad to marker bleed before anyone notices.
The self-stick backing is the second thing. Some pads use adhesive strips that hold fine on drywall and fail on painted conference room walls. We tested a few options during our 2024 vendor consolidation project. Adhesion on textured walls was the deciding factor, and we chose the Post-it easel pads because they met that requirement. (Should mention: we tested in a room with a slight climate-control draft, which may have made the adhesion test tougher than average.)
Perforation is a small thing that becomes big when a facilitator is tearing pages in front of a client. Clean perforation means the sheet comes off without ripping. My rule: use the good pads for client and executive sessions. For internal brainstorming, any pad that doesn't bleed through is fine.
How do I pick A4 paper without overpaying?
First, confirm you actually need A4. Most US offices run on Letter. A4 requests usually come from international teams or from documents formatted for European clients. We keep two cases on hand for our UK-based colleagues and print everything else on Letter.
Second, don't chase the lowest unit price. It's tempting to compare cases by the ream and pick the cheapest. But the "always buy the cheapest paper" advice ignores printer wear. Lower-brightness, lighter-weight paper sheds more dust, jams more often, and costs you in service calls. When I compared our jam logs and paper invoices side by side over a full year, I finally understood why the cheapest case wasn't the cheapest outcome. What I mean is that the sticker price doesn't include the cost of jams, service calls, and reprints.
As of January 2025, a case of 10 reams of standard 20lb A4 runs roughly $45-65 from major office suppliers, depending on brightness and brand. Premium 24lb or 28lb A4 sits around $90-120. Verify current pricing—paper costs move with pulp markets.
We use 20lb for internal drafts and 24lb for client-facing documents. Brightness matters more than weight for scanned documents, in my experience. A bright 20lb sheet scans cleaner than a dull 24lb one.
What's the fastest reliable way to scan documents on the printer?
The question I get most often is how to scan documents on a printer without creating a filing nightmare. The answer is scan-to-folder, not scan-to-email. Set it up once and you'll never go back.
Scan-to-email chokes on anything over 20 pages. The file size limit hits, the email server rejects it, and you're standing at the printer re-scanning in batches. Scan-to-folder avoids all of that. 300 dpi for documents that need OCR, 200 dpi for anything that's just for the record. Save as PDF/A if it's a document you need to keep for compliance. That's it.
One thing people miss: clean the scanner glass. I don't have hard data on how much time we lose to dirty glass, but based on our own scans, a streak down every page means someone skipped the weekly wipe-down. We put it on the facilities checklist. Two minutes a week, fewer re-scans. Simple.
Should we pay rush fees when we need supplies before a deadline?
Sometimes. Depends on what's at stake.
In March 2024, we paid $300 extra for rush delivery on easel pads and markers. The alternative was missing a $12,000 client workshop because the materials were stuck in standard shipping. The $300 was the cheapest part of that event.
After getting burned twice by "probably on time" promises from suppliers, we now budget for guaranteed delivery on deadline-critical orders. You're buying certainty, not just speed. An order that "should arrive by Thursday" is a risk. An order with a confirmed delivery date is a plan. Look, I'm not saying budget suppliers are always bad. I'm saying they're riskier when a deadline is involved.
But I don't pay rush fees on restocks. If we're low on A4 paper and we have a week of buffer, standard shipping is fine. The mistake I see is treating every order as urgent. That's how you end up paying 40% more annually for artificial emergencies. This worked for us, but our order volume is predictable and our deadlines are known in advance. If you're a seasonal business with demand spikes, the calculus might be different.
What do I do with requests that aren't office supplies at all—like a "grow a garden calculator"?
Every procurement system has a catch-all category. That's how a request for a "grow a garden calculator"—a planning tool for vegetable beds—landed in my queue last spring. Technically not office supplies. The requester was on our facilities team, and it was $18.
I approved it. Here's why: the cost of saying no was higher than the cost of the item. I would have spent 20 minutes explaining the procurement policy, escalating to a manager, and generating a rejection notice. For $18, I'd rather keep the process moving.
But I also set a threshold. Anything under $50 that's a legitimate business tool gets approved with a note. Anything over $50 goes through the normal review. We've had requests for ergonomic keyboard trays, label makers, and once, a very specific hole punch. The garden calculator was the oddest one, but the principle is the same: procurement exists to enable work, not to gatekeep it.
One caution: odd requests still go through vendor vetting. In 2021, I ordered from a new supplier who couldn't provide a proper invoice—handwritten receipt only. Finance rejected the expense report and I ate $2,400 out of the department budget. Now I verify invoicing capability before placing any order, whether it's A4 paper or a garden calculator. That mistake cost more than every odd request I've approved since.